Last Updated on 4 years by admin
Likewise, not only sophisticated electronic devices get damaged from Low Voltage / High Voltage Power. Anyone can think the new generation switch-mode power supplies were made to address this issue; however, still, there is a limit that the device can take in. The equipment that we are introducing today can protect your whole house.
Features including Low Voltage / High Voltage cut iff
ZHRV2-36T includes four preset’s two presets are for Low & High Voltage cutoff level setting. Moreover, the other two presets are available to support you with a delay time. As an example, if the high V cut off of ZHRV2 is set to 250VAC as soon as the grid power increase the set V(250V) the output gets terminated. The status indicator lit up to show that the power is higher than the usual. The output will remain off until the power returns to its standard V level. Then the delay timer will kick in and wait until the set time reaches. At that point, if the Grid Voltage is standard, the device will pass the energy.
ZHRV2-36T Technical Parameters
| Rated Supply Voltage | AC220V |
| Rated Supply Frequency | 50/60Hz |
| Contact Configuration Capacity (A) | 32A, 40A, 63A, 80A ( We tested the 40A for the whole house) |
| Maximum Load Power | 7kVA(40A), 13kVA(63A), 17kVA(80A) |
| Over Voltage Action Value | 36G:265V 36T:225~265V (knob setting) |
| Over Voltage Reset Value | 36G:257V 36T Over-voltage action value *(97%) |
| Under Voltage Action Value | 36G:175V 36T:165~215V (knob setting) |
| Under Voltage Reset Value | 36G:180V 36T Under-voltage action value *(103%) |
| Action Delay | 36G:0.1s 36G:0.1s – 10s (knob setting) |
| Power On Delay | 36G:2s 36T:0.3s~30s (knob setting) |
| Reset Delay | 36G:1s 36T:0.3s~30s (knob setting) |
| Voltage Measurement Error | ≤ 1% |
| Delay Error | ±10%+0.1s |
| Knob Setting Accuracy | ±1V |
| Rated Insulation Voltage | 415V |
| IP Class | IP20 |
| Class of Pollution | III |
| Electrical Life | 105 |
| Mechanical Life | 106 |
| Altitude | ≤2000m |
| Allowable relative humidity | ≤50%(400C) No Condensation |
| DIN Rail Standard | 35mm Width (IEC/EN60715) |
Low & High Volt Protector Wiring Diagram
Furthermore, hope ZHRV2-36T helps you protect your home from Low Voltage and High Voltages. Also, you can find the device on Ali Express and eBay. Please let us know if you need more support with the product installation/configuration
You may also like:
- LeetDown – Downgrade to iOS 10.3.3 for A7 devices
- How to Install Sideloadly
- Odyssey Jailbreak for iOS 13 – iOS 13.5 Jailbreak
